SRB XRS01 Change Wheel

eprad · Apr 20th 2020, 5:09pm

Hello all,

I have to change the 4 wheel on my SRB XRS01. I tried last year on one wheel and it was an very big issue because it was very hard just to get out the wheel and it was impossible to put the new one. I think the issue is on the rim too large. With great force I succeded to change the wheel.
I guess XRS02 has the same rim ...
Just for information, the problem is with the new wheel, but on the original (old one) wheel too...

Did you get the same problem ?

Thank you

Skatingwadl · Apr 20th 2020, 7:06pm

Hi eprad,
you mean "changing the tires, right?"

Maybe this can help but I haven't tried it yet. https://nordicx.com/Zubehoer/Nuetzliches/RMH-Reifenmontierhilfe.html.

I also do use rims similar to these ones: https://www.der-rollenshop.de/Powerslide-Aluminiumfelge?curr=EUR&goshrsde=1&gclid=EAIaIQobChMI5qCD9b736AIVZrR3Ch1cLQWtEAYYAiABEgLiWPD_BwE

This makes it a lot easier to change the tires.

Formerly, I used this: cross-skate-shop.com/epages/63…ducts/CSS-Vollmetallhebel

and this: https://www.cross-skate-shop.com/epages/63170972.sf/de_DE/?ObjectPath=/Shops/63170972/Products/%22CSS-Reifengel 50 g%22

If there are still any questions, don't hesitate to contact me.

Kind regards

Ralph

eprad · Apr 21st 2020, 10:16am

Wouhaaa thank you very much

Yes I mean "tire" (I'm french and you know we don't speak english

)

I think the "RMH Easy Coat Changer" is not be able to change a wheel on SRB XRS01. We succeeded to change the tire with two person and three iron bar. But the "CSS Vollmetall Reifenmontierhebel 2.0" is that I'm looking for thank you.
Are you sure the "Powerslide aluminium rim" is compliance with XRS01 ?

Skatingwadl · Apr 21st 2020, 10:44am

Je vais téléphoné avec eux et demandé. Quand j'ai des nouvelles, je vais vous ecrire.

eprad · Apr 21st 2020, 12:00pm

I have phoned last year and I have proposed to change by a skike rim and the response was "it is not compliance with XRS01".

I hope Powerslide aluminium rim will be...

I am going to buy CSS Tyre level and fitting gel...

Skatingwadl · Apr 22nd 2020, 9:16am

Hi,
RMH also works with SRB rims. That's what they say in the video and there's no reason why not. I also got info from der-rollenshop.de. They said the Powerslide rim is just 2 mm wider than the SRB ones. So they don't expect any inconveniences when using those rims.

Kind regards

Ralph

eprad · Apr 22nd 2020, 10:50am

Thank you very much, it 's a very good news.
I just hope spacer will be compliance too...I am going to buy this rim and I will post when all will be mounted.

eprad · Apr 25th 2020, 11:00am

This is the result...KO
Problem is exactly the same, after one hour and two iron bar , i succeeded to put the tire on the rim but...of course after too much try, I have cut the tube...
Yesterday I have loose a screw and that get me on the floor...
Sometime I hate this sport
If somebody knows how to change a tire on a SRB XRS01 when you are not Hulk...I get the tricks
I am going to buy new tube, new screw and more ...alcool to forget

eprad · May 7th 2020, 10:50am

Ok guys, I have the trick

I have buyed a complete wheel (nordicx.com/en/Spare-parts/SRB…6034859416e91b50b5ddf5388) for 29€.
If you compare with a tire 17€ + a tube 7€ = 24€ + 2hours ..it's a good deal I mean

There was just a little problem...When I mounted the new wheel, the roll was very bad...as if something did a brake.
The issue was on the spacer INSIDE (the one between the both bearing) too short.
I fixed it with a little ring (the ring you find with the screw for exemple) I added with this spacer...and yeeeeessss the roll is "perfect" now.
The 11/05 France will be in deconfinement...great outdoor will be for me

SRB XRS01 Change Wheel

SRB XRS01 Change Wheel

Share

Similar Threads